[. . . ] Work with detergents must only be performed on liquid-tight work surfaces with connections to the wastewater runoff. Engine washes, underbody washes, may only be carried out using washing stations equipped with an oil separator. Lower water and energy use thanks to the "eco" setting (see chapter "Operation"). Notes about the ingredients (REACH) You will find current information about the ingredients at: www. [. . . ] appliance switch The appliance switch prevents unintentional operation of the appliance. Lock trigger gun This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance. Overflow valve with pressure switch The overflow valve prevents the permissible working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high pressure jet is stopped.  Never draw in fluids containing solvents or undiluted acids and solvents!Do not use acetone, undiluted acids and solvents, as they corrode the materials used on the appliance. Filling stations) the corresponding safety regulations must be observed. Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging). 1 Slide-out preventer 2 Coupling element for water connection 3 Suction hose 4 Storage for trigger gun 5 Water connection with integrated sieve 6 Appliance switch (0/OFF – 1/ON eco). The work pressure can be stagelessly regulated between "Min" and "Max". Illustration  Screw the coupling element to the water connection on the appliance. σ Attach the water supply hose to the coupling on the water connection. EN – 9 19 Operation ṇ Danger The water jet that is emitted from the highpressure nozzle results in a repulsion power acting on the hand spray gun. Make sure that you have a firm footing and are also holding the hand spray gun and spray lance firmly. The jet may not be directed at persons, animals, live electrical equipment or at the appliance itself. Notice Car tyres, paint or sensitive surfaces such as wood should not be cleaned with the dirt blaster, as there is a risk of damage. Notice Risk of damage to the paintwork When working with the washing brush, it must be free of dirt or other particles. Illustration  Push the spray lance into the trigger gun and fasten it by turning it through 90°. σ Pull on the lever of the trigger gun; the device will switch on. Switch position "eco" There are the switch positions "1/ON" and "eco" to switch the appliance on. Note: The switch position "eco" allows the control of pressure and leads to water and energy savings of approx. [. . . ] σ Pull out the sieve in the water connection using flat-nose pliers and clean under running water. 2 minutes) and run it until the water discharging from the HP outlet is free of bubbles. Accessories and Spare Parts Special accessories Special accessories expand the possibilities of using your appliance. You will find a list of spare parts at the end of these operating instructions. [. . . ]